DIY Vintage Christmas Blocks!!

I'm soo excited to share this project with you! I think they came out great and I LOVE them!!  My grandfather made my mom a set for her house that read "Merry Christmas" and he used wooden letters and paint for his.  This is a different version I created for my love of vintage sheet music.  Enjoy!

Here's a sneak peek before we begin:

Materials you will need:

Two 3x3 wood pieces (or premade blocks)

Wood Stain

Some sort of saw (if you are cutting your own blocks)

Vintage sheet music

ModPodge (I used satin finish)

Hot Glue Gun

Distress Ink (avail. at AC Moore or Michael's)

Glittery letters (or you can stencil them)

Step 1:

First, stain the wood in the color of your choice.  I chose to go with a "redder" stain because I was only doing two coats and wanted it to have richer color.  I found this spray paint-like stain, which I immediately scooped up!

Very easy to use and coated really nicely...

Now, let the wood dry and apply another coat if needed

My dad helped me stain them and we hung them from a nail while spraying

After the wood dried, my dad cut the wood into 2.5" blocks.  Sorry no pics, but my dad was a trooper - there were a lot of them! Thanks Dad!! I needed 13 blocks to spell out "Joy to the World", but obviously count your blocks needed to create whatever saying you are using.  I also had extra blocks incase there were a few mistakes (or for a future project!)

We lightly sanded the edges where the cut was to make sure there would be no splintering.  

Step 2:

After the blocks were dried and cut (there were a few days in between this), I measured the blocks on the vintage sheet music and lightly traced around the edge.  If you are wondering where to get vintage sheet music, Ebay is a great place to look.  I got 5 books of sheet music for around $6.  

After I traced around the block, I ripped the page lightly all around to create the torn look.  Little did I know, I was tearing through two pages which ended up being a time saver!  I would definitely recommend tearing two pages together to create two little squares.  

Then, fit it onto the block and rip any little pieces that do not fit along the edges.

Now, time to use your distress ink.  The pages were slightly yellowed already, but I wanted to add a more vintage feel. 

Lightly press the page onto the ink pad...

Then, use your ModPodge to glue the paper to the block.  I also used the ink on the blocks around the edges to make sure the whole block looks stained.  You could take the time to stain each side, but I just stained the entire wood piece then cut, leaving two sides without stain...you won't see the back right ? ;)

Apply ModPodge in a thin layer

Place the sheet music onto the top of the block covered in ModPodge

Now do the same thing to the other blocks...

When they are all done, put a light coat of ModPodge over the top of each block to seal the sheet music on.  This also made the paper a little darker which I liked. 

Annabelle guarded the music just incase ;)

Step 3:

Pick out your letters and place them on your blocks accordingly.  Before I placed the letters, because I have OCD I made sure that the blocks lined up nicely, trying to create a nice flow from block to block with the way the music looked.  

Once the letters are lined up to your liking, or to satisfy your OCD like me ;) use your glue gun to attach the letters to the blocks. 

The "W" was a little too big with the swirly part, so I cut off a little then glued it back together to make the swirl shorter.

Step 4:

Show off your hard work! I am obsessed with these...I mean true love...

I put them in my hutch to see how they would look...don't mind the fall stuff...it's all coming down this weekend to put up Christmas!!

again...

from the side...

another...

and another way...

I absolutely love them & I hope you do too! I'd love to see if you make your own version!