Hope you are having a wonderful Sunday :) I'm so excited to share these pillows with you! I had no idea what I was doing & the result turned out great ~ don't you love when that happens! I'm sure many of you have seen the Ballard Design "Mr. and Mrs." pillows, here's a refresher:
{Ballard Design} |
{If you do not have a fabric store near you, click on the link to Joann Fabrics above and you can order from their website!}
Okay, lets get started... here's what I used to create 2 pillows:
- 1 yard of burlap-looking fabric
- 2 pillow inserts (small - also found at Joann's or Ikea)
- No Sew Glue
- Silhouette machine or stencil equivalent
- Fabric Paint
- Small Paintbrush
I started my Ballard Design pillows by laying out the fabric, doubled to have a front and back with one cut and placed the pillow insert on top, leaving approximately 1 - 1 1/2 inches all around. Again, no clue what I was doing... just trust me ;)... knock-off say whattt
...ya know just eyeball it ;)
Once those are cut, start with your stencils! I used my new Silhouette machine, but you can use any type of stenciling method you have on hand.
I made the letters about 3" tall...
Tape the stencil to the fabric using any tape you have and try to center the letters where you would like them on the pillow. I tried to stay in the upper middle part. I added a small sheet of waxed paper in between the fabric, which really helped the letters not to stick to the bottom piece. Now, paint inside of your stencils using a small brush. Only use a small amount of paint to create the rustic, stamped look...
Remove the stencil after you are done painting, before paint dries
and continue with "Mr."...
now let dry side-by-side...awww...love.
now, the fabric paint states that you need to let the fabric dry for 4 hours...whatt?! I think not. If you are impatient like me, let dry maybe 25-30 mins then check it out for tackiness.
After they are "dry," apply a thin line of glue about a 1/2 from the edge and leave about 1 inch at the top of the fabric:
Do the same to the other side, leaving the top of the fabric open to slide pillow insert in. Let dry inside out for at least 15 minutes on the dining room floor a flat surface:
When the glue is dry (or strong enough to not pull apart) turn the covers inside out again, right side in...whatever...just the right way with the words on the front :)
Slip in the pillow insert...
and you are left with some excess fabric, so I just folded it up nicely to close the seam and glued it shut like this:
and there you have it! Easy right?? I love them...
Hope you've enjoyed this tutorial: now go make your own no sew knock-offs!!
Linking to these lovely parties: